Good tools for an easy life.

Maintenance of electric chain saw and precautions

by:WORKSITE     2021-01-04
The chain and the guide should not be too tight. When the electric chain saw is working, lubricate it for 10 minutes to maintain the guide and the chain. At the same time, the variable box of the electric chain saw has to be yellow glycerin a year ago, and the carbon brush of the motor needs to be replaced frequently, about half a year. Things to keep in mind before operation:

1. Wear shoes when working.

2. It is not allowed to wear obese, open clothes and shorts, and no accessories such as ties, bracelets, anklets, etc.

3. Carefully check the degree of wear of the saw chain, guide plate, sprocket and other components and the tension of the saw chain, adjust and replace it.

4. Check the switch of the electric chain saw, whether the power connector is connected firmly, and whether the cable layer is worn.

5. Check the working environment and reduce stones, metal objects, branches and other discards.

6. Choose the evacuation channel before operation.

operating

1. When the processed original strip is within 1.5m from the conveyor, operation is not allowed.

2. Before turning on the power, turn off the electric chain saw switch to reduce accidental initiation.

3. Start the electric chain saw idling for 1 min before making lumber to check whether the operation is normal.

4. When launching or operating, hands and feet must not approach the rotating parts, especially the upper and lower parts of the chain

5. Check when the fuse is blown or the relay is tripped.

6. No line load operation is allowed, and no high-capacity fuse is allowed.

7. Operate the electric chain saw with both hands.

8. Stand firm during operation, and do not stand under the original strip or log, or operate on the original strip or log that may be tumbling.

9. When the shortcomings of the saw, you should pay special attention to the auxiliary personnel.

10. During operation, lubricate and cool the sawn timber organization.

11. When the original blade is sawn off, pay attention to the intention of the wood, and lift the electric chain saw after sawing off.

12. Turn off the switch of the electric chain saw first when transferring, and do not run during the transfer.
Custom message
Chat Online
Chat Online
Chat Online inputting...