Good tools for an easy life.

Matters needing attention in the use of Worksite

by:WORKSITE     2021-01-07
1. Workplace

  A) Please keep the work area clean and well-lit. Chaotic and dim work areas can cause accidents.

  B) Please do not use Worksite power tools in an explosive environment, such as an environment with flammable liquid, gas or dust. Sparks from Worksite power tools may ignite dust and gas.

  2, electric safety

  A) The power socket must match the power plug of the Worksite power tool. Do not modify the power plug under any circumstances. Do not use any socket with a common ground. Unmodified plugs and suitable sockets can reduce the risk of electric shock.

  B) Please avoid physical contact with grounded surfaces, such as pipes, heaters, stoves and refrigerators. If your body is grounded, it will increase the risk of electric shock.

  C) Keep the equipment away from rain and humidity. Water in the Worksite power tool increases the risk of electric shock.

  D) Please do not use the power cord for other purposes, such as when lifting, hanging up tools or unplugging the plug from the socket. Keep the power cord away from heat, oil, sharp edges or moving tool parts. A damaged or entangled power cord increases the risk of electric shock.

  E) When you use Worksite power tools outdoors, please use an extension cord that is allowed to be used outdoors. Use an extension cord suitable for outdoor use to reduce the risk of electric shock.

  3, personal safety

  A) Please stay awake, focus on your work, and operate the Worksite power tools sensibly. Please do not use Workite power tools when you are tired or under the influence of narcotics, alcohol, or drugs. Any momentary distraction when using Worksite power tools may cause serious injury.

  B) Please wear personal protective equipment and always wear protective goggles. According to the form and characteristics of Worksite power tools, bring personal protective equipment, such as dust mask, non-slip safety shoes, safety helmet or noise protection earmuffs, to reduce the risk of injury.

  C) Please avoid opening the device unintentionally. Before inserting the plug into the socket, make sure that the switch is set to the 'off' position. When moving or carrying the Worksite power tool, if you put your finger on the switch, or plug the Worksite power tool into the power source when the switch is in the on position, it may cause an accident.

  D) Please remove and remove the adjusting screwdriver or wrench before opening the Worksite power tool. Tools or wrenches that come into contact with rotating equipment parts may cause personal injury.

  E) Please don't overestimate yourself. Always take care to stand safely and keep your balance. This will ensure that you can better control the Worksite power tools in the event of an accident.

  F) Please wear appropriate clothes. Do not wear clothing and accessories that are too wide. Keep hair, clothes and gloves away from working parts. Loose clothing accessories or long hair may be caught by moving parts.

  G) If the purchased equipment includes a dust collection or dust collection system, please connect and use these equipment correctly. Using these devices can reduce the danger caused by dust.

   4. Use and maintenance of Worksite electric tools

  A) Please do not overload the Worksite power tools. Please select the appropriate Worksite power tools according to the job requirements. Using suitable Worksite electric tools at rated speed can make you better and safer to complete your work.

  B) Do not use the Site power tools with damaged switches. All Worksite power tools that cannot be controlled by switches are dangerous and must be repaired.

  C) Please unplug the plug from the socket before adjusting the equipment, changing accessories or storing the equipment. These safety standards prevent accidental starting of the equipment.

  D) Please put the unused Worksite power tools out of the reach of children. Please do not allow people who do not understand the Worksite power tool or who have not read this manual to operate the Worksite power tool. It is dangerous for people without training to use Worksite power tools.

  E) Please take care of the Worksite power tools. Please check whether there are any wrong adjustments, stuck moving parts, damaged parts, and all other conditions that may affect the normal operation of the Worksite power tools. The problematic Worksite power tool must be repaired before it can be used. Many accidents are caused by improperly maintained Worksite power tools.

  F) Please keep the cutting tools sharp and clean. A carefully maintained cutting tool with a sharp blade is less likely to be stuck and easier to operate.

  G) Please use the Worksite power tools, accessories, replacement tools, etc. correctly in accordance with the requirements of the operating instructions, taking into account the working environment and the type of work, and according to the design purpose of the specific Worksite power tools. Applying Worksite power tools to work beyond the scope of use of the design may cause danger.

   5. Maintenance and use of battery Worksite power tools

  A) Please make sure that the switch is off before inserting the battery. Inserting the battery into the opened Worksite power tool may cause an accident.

  B) Please use the charger specified by the manufacturer to charge the battery. A charger suitable for one type of battery may cause a fire when charging another type of battery.

  C) Please only use specially designated batteries in the Worksite power tools. Using other batteries may cause injury and fire hazards.

  D) Keep unused batteries away from office clips, coins, keys, nails, nuts or other small metal objects that may cause short circuits. Short circuit of the electrode may cause burning or even fire.

  E) Improper use of batteries may cause liquid to leak out. Please avoid contact with these liquids. Once in contact, rinse immediately with water. If the liquid gets into your eyes, seek medical attention immediately. The escaping fluid may cause skin irritation or cause burning.
Custom message
Chat Online
Chat Online
Chat Online inputting...