Specification for electric chain saw: what are
The electric chain saw is a woodworking power tool for cutting with a rotating chain saw blade. Let’s first understand the specifications of the electric chain saw: What are the preparations? What should be paid attention to during the operation? Electric chain saw preparation: 1. Safety shoes must be worn during work. 2. It is not allowed to wear large, open clothes and shorts during the operation, and it is not allowed to wear accessories such as neckties, bracelets, anklets, etc. 3. Carefully check the wear level of the saw chain, guide plate, sprocket and other components and the tension of the saw chain, and make necessary adjustments and replacements. 4. Check whether the switch of the electric chain saw is intact, whether the power connector is firmly connected, and whether the cable insulation is worn. 5. Thoroughly inspect the work site and remove stones, metal objects, branches and other discarded objects. 6. Choose safe evacuation passages and safe areas before work. Precautions for operation of electric chain saw: 1. When the processed original strip is within 1.5m from the conveyor, the operation is not allowed. 2. Before turning on the power, the electric chain saw switch must be turned off to prevent accidental startup. 3. Before making materials, start the electric chain saw for idling for 1min and check whether the operation is normal. 4. When starting or operating, hands and feet must not be close to the rotating parts, especially above and below the chain. 5. When the fuse blows or the relay trips, it should be checked immediately. 6. It is forbidden to overload the lines and do not allow access to high-capacity fuses. 7. The electric chain saw must be operated with both hands. 8. Be sure to stand firm during the operation. Do not stand under the original strip or log and operate on the original strip or log that may roll. 9. When troubleshooting the clamp saw, special attention should be paid to the safety of auxiliary personnel. 10. During the operation, the sawing mechanism should be lubricated and cooled at any time. 11. When the original strip is about to be cut off, pay attention to the movement of the wood. After sawing, quickly lift the electric chain saw. 12. During the transfer operation, the electric chain saw switch must be turned off first, and running is not allowed during the transfer.