Good tools for an easy life.

Use and storage-hand-held BOSO power tools

by:WORKSITE     2021-01-09
1. Hand-held BOSO power tools must be handled by special personnel, regular inspections and sound handling principles.

2. Perform visual inspection and electrical inspection before each use.

Visual inspection includes:

(1) Whether the shell and handle are cracked or damaged, and whether the fasteners are complete and useful;

(2) Whether the flexible cable or cord is intact, whether the protection connection (ground) is accurate and robust, and whether the plug is intact;

(3) Is the switching action normal, flexible and flawless;

(4) Whether electrical protection equipment and mechanical protection equipment are complete;

(5) Some things are tumbling, are they flexible and barrier-free, and the card head is strong.

Electrical inspection includes:

(1) The response is normal after power on, and the switch control is useful;

(2) After power-on, the shell should not leak electricity after checking with a test pen;

(3) The signal indication is accurate, and the active control effect is normal;

(4) For rotating objects, check the electric brush spark and sound response after power-on.

3. Hand-held BOSO electric tools should be equipped with a separate power switch and protection equipment in the application. The power cord must use copper core multi-stranded rubber sheathed flexible cable or PVC sheathed cable; the cable should avoid heat sources and should not be delayed to the ground.

4. The power switch or plug should be intact, and it is forbidden to directly insert the wire core into the socket or hook it on the switch. In particular, avoid swapping the front and the zero line.

5. When operating rotating objects such as electric drills or electric hammers, do not wear wire gloves, and do not hold the rolling objects or wires with your hands. Prevent the wires from being rolled or twisted during use.

6. After the hand-held BOSO power tool has been used, it is necessary to disconnect the power supply on the power side.

7. When using hand-held BOSO power tools at high altitudes, there should be a dedicated escalator below, and the power supply can be quickly blocked in the event of an electric shock.
Custom message
Chat Online
Chat Online
Chat Online inputting...