What is the difference between 22 and 30 cylinders
The difference between the 22-cylinder and 30-cylinder air pumps is the different inflation speed. Inflator is also called inflator, air pump, and air pump works by the operation of the motor. The motor runs. When pumping, the valve of the connector is flushed by the atmospheric pressure, the gas enters the cylinder, and when pumping into the tire, the valve is The air pressure in the cylinder is turned off, and the gas enters the tire. Pneumatic booster pumps are divided into gas-liquid booster pumps and gas booster pumps. The principle of the booster pump is to use the low air pressure of a large area piston to generate a high hydraulic pressure for a small area piston. Nitrogen booster pump is a type of pneumatic booster pump. Using gas drive, no arc and spark, can be used in hazardous locations. Compared with other air-driven pumps, Worksite booster pumps can accomplish the same job, but they have fewer parts and seals and are easy to maintain. For whatever reason, the pressure of the air pump causes the pressure of the pressure-holding circuit to drop, and the booster pump will automatically start to supplement the leakage pressure and keep the circuit pressure constant. Safe operation, using gas drive, no arc and spark, completely used in places with flammable and explosive liquid or gas. Simple maintenance and cost-effective booster pump is a plunger pump. The booster pump quickly reciprocates during operation. With the increase of output pressure, the pump's reciprocation slows down until it stops. At this time, the pressure of the pump is constant and the energy consumption is low. The components stop moving.